80 mm cast iron wheel diameter
Heavy-duty structure
200 kg load capacity
Suitable for trolleys entering the oven
Plate mounting system
90x114 mm mounting dimension
113 mm height from the ground
Use in rotating oven trolleys
Ø80 mm Heavy-Duty Cast Iron Wheel is designed as a heat-resistant wheel model for use in trolley ovens and rotating oven trolleys. With a 200 kg load capacity, 113 mm height and 90x114 mm plate mounting, it can be used in professional transport systems requiring heavy loads.
Ø80 mm Heavy-Duty Cast Iron Wheel
EKMAŞ Ø80 mm Cast Iron Wheel is a heavy-duty wheel solution for mobilizing equipment used in professional baking.
For Trolley Ovens Entering the Oven
The product is specifically designed for use in trolley ovens that enter the oven and is intended for use in hot production environments.
Use in Rotating Oven Trolleys
The cast iron wheel can be considered for the movement mechanism of suitable trolley ovens used in rotating oven systems.
Heat-Resistant Wheel Structure
The product page indicates that cast iron wheels are heat-resistant wheels that can be used in trolleys entering the oven.
Definite Temperature Limit Should Be Evaluated Separately
Being defined as heat-resistant does not automatically mean a specific temperature can be accepted; the working temperature should be checked according to the technical specifications of the application.
80 mm Wheel Diameter
The wheel diameter is 80 mm. This value is one of the basic dimensions in spare part selection or new equipment design for an existing oven trolley.
Heavy-Duty Model
The product falls into the heavy-duty load capacity class and is evaluated for professional transport systems working with higher weights.
200 kg Load Capacity
The stated load capacity for a single wheel is 200 kg. When determining the final trolley capacity, other structural components should also be considered.
Higher Capacity than Thermoplastic Wheels
The product page states that the cast iron wheel has a higher load capacity compared to a thermoplastic wheel; this is an important selection criterion for heavily loaded oven trolleys.
Plate Mounting Type
The wheel is mounted to the body via a plate. The connection area of the trolley to be mounted must be compatible with the product's plate size.
90x114 mm Mounting Dimension
The product's mounting dimension is 90x114 mm. This measurement should be compared with existing mounting points when replacing spare wheels.
113 mm Ground Clearance
The wheel installation height is 113 mm. This value can affect the base-level height of the trolley from the ground and the dimensional match with existing wheels.
Compatibility with Existing Trolley Geometry is Important
As using a wheel of different height can alter the horizontal stance of the trolley, installation height should be checked before replacement.
Movement Support in Oven Trolleys
The wheel system helps to transport loaded trolley ovens from the preparation area to the oven and from the oven to other production departments.
Purpose for Use in High Heat Cycles
In production processes where trolleys enter and exit the oven and are exposed to temperature changes, the cast iron wheel structure provides a suitable professional option.
Can be Used in Professional Bread Ovens
It can be used in professional bread production facilities with rotating ovens or trolley ovens entering the oven, in line with technical compatibility.
Suitable for Bakery Production Areas
It can be considered for the need for heavy-duty wheels in bakeries and baked goods businesses where trolley ovens enter hot production areas.
Trolley's Own Weight Should Be Considered
When evaluating load capacity, the weight of the stainless or metal trolley body should be included in the total load, in addition to trays and products.
Balanced Loading Protects the Wheels
Balanced distribution of trays on the trolley helps to control the sharing of weight among the wheels.
Total System Capacity Must Be Calculated Separately
The value of 200 kg is the capacity of a single wheel; the total transport limit should also consider the trolley body, shelves, welds, connections, and properties of other wheels.
Dynamic Loads Are Different from Static Loads
Additional forces may be applied to the wheels when the loaded trolley is moved, changes direction, or passes over surfaces.
Controlled Movement at Oven Entry and Exit
Avoiding hard impacts of the wheels against thresholds during the entry or exit of the trolley ovens can help reduce sudden mechanical impacts.
Floor Transitions Should Be Considered
Since rail transitions, thresholds, or surface irregularities can increase the mechanical load on the wheel, the structure of the transport route is important in use.
Can Be Used as a Spare Wheel
It can be considered as a replacement for a worn wheel in existing oven trolleys compatible with 80 mm diameter, 90x114 mm mounting, and 113 mm installation height.
Matching Dimensions in All Wheels Must Be Ensured
As using wheels with different diameters or installation heights on the same trolley can affect the balance, the measurements should be compatible.
Connection Points Should Be Regularly Checked
Periodically checking the plate and fasteners for loosening or physical damage after intensive use is recommended.
Movement of the Swivel Mechanism Should Be Monitored
If difficulty is noticed in the wheel's directional change movement, the mechanism should be examined for foreign matter, deformation, or connection problems.
Production Residues Should Be Cleaned
Regular cleaning should be carried out as the accumulation of flour, dough, crumbs, strings, or packaging parts around the wheel can reduce mobility.
Wear on the Wheel Surface Should Be Monitored
Any unusual wear or deformation in the cast section in contact with the ground should be visually inspected during maintenance checks.
Physical Control After Heating
Including the wheel and connection areas in the maintenance plan for general physical condition checks after intensive oven use can be beneficial.
Selection of Cast Iron Wheel and Thermoplastic Wheel
For applications needing higher load capacity, the cast iron model may provide an advantage; the final selection should be made by evaluating oven type, load, mounting dimension, and temperature conditions together.
Selection of Ø80 mm Heavy-Duty Cast Iron Wheel
When evaluating the product, the 80 mm diameter, 200 kg load capacity, 113 mm installation height, 90x114 mm plate mounting, and intended use in oven trolleys should be considered together.
Professional Solution for Rotating Oven Trolleys
EKMAŞ Ø80 mm Heavy-Duty Cast Iron Wheel is a functional equipment part designed for the movement needs of suitable rotating oven and trolley ovens with its heat-resistant structure, heavy load capacity, and plate mounting system.
Technical Specifications
The basic technical and usage features of the Ø80 mm Heavy-Duty Cast Iron Wheel are listed below.
| Product Type |
Cast Iron Wheel |
| Load Class |
Heavy-duty capacity |
| Wheel Diameter |
80 mm |
| Load Capacity |
200 kg |
| Height from Ground |
113 mm |
| Connection Type |
Plate-mounted |
| Connection Dimension |
90x114 mm |
| Usage Feature |
Heat-resistant structure |
| Basic Usage |
Trolley ovens entering the oven |
| Oven Type Usage |
Can be used in rotating oven trolleys |
| Comparative Feature |
Higher load capacity than thermoplastic wheels |
Usage Areas
Ø80 mm Heavy-Duty Cast Iron Wheel can be used in trolley ovens entering the oven, rotating oven trolleys, and professional mobile equipment with compatible connection dimensions. While supporting heavy load requirements with its 200 kg single wheel load capacity, its heat-resistant structure offers a significant advantage for use in hot oven environments. For correct selection, the 90x114 mm connection dimension, 113 mm height from the ground, and total load of the trolley should be evaluated together.
80 mm cast iron wheel Heavy-duty cast iron wheel 200 kg capacity wheel Heat-resistant wheel Oven trolley wheel Rotating oven wheel Trolley oven wheel Plate-mounted cast iron wheel 90x114 mm plate-mounted wheel 113 mm high wheel Professional oven wheel Heavy load carrying wheel Industrial cast iron wheel EKMAŞ cast iron wheel
About EKMAŞ
EKMAŞ offers transport trolleys, tray systems, and auxiliary equipment for professional baking and bakery production. Ø80 mm Heavy-Duty Cast Iron Wheel is a professional spare part solution that can be used in suitable trolley ovens entering the oven with its 200 kg load capacity, heat-resistant structure, 90x114 mm plate mounting, and 113 mm height from the ground.